Smoant presents the Battlestar Squonker 200W starter kit, an amazing package that delivers top of the line features in an affordable package. This kit comes with everything a user needs to vape today!

The Battlestar Squonker Box Mod has several output modes including variable wattage mode, temperature control suite, variable voltage mode, and DVW mode. Variable voltage mode has an output range of 1 to 200W, atomizer resistance of 0.05 to 3 ohm, and an output voltage range of 0.5 to 8.5V. Temperature control has a range of 200 to 600 degrees Fahrenheit, user defined temperature control mode, atomizer resistance range of 0.05 to 2.0 ohm and is compatible with nickel, titanium, and stainless steel. Variable voltage mode has a range of 1.0 to 8.0V and DVW mode allows the user to define the wattage curve. The Smoant Battlestar Squonker has a 0.96 inch OLED screen that displays output mode, output temperature, output wattage, output voltage, battery life indicator and more. Evolving with todays best squonk devices, the Squonker is designed with a 7ml PMMA hard plastic reservoir; completely separate from the battery compartment. This device squonks by pressing the button on top of the device and can be refilled by removing the silicone port at the base of the reservoir. The reservoir can be accessed through the bottom sliding latch door which also houses the two 18650 batteries that power this device (sold separately). This box mod has a three button control interface which consists of one over-sized firing button and two adjustment buttons. A USB port along the base of the face panel allows for micro USB 2A charging and software updating. 

The Smoant Battlestar Squonker RDA paired with this device is 24mm in diameter and is 29mm tall. Its build deck has a simple dual post, quad terminal design with 3mm by 2mm terminals and coil leads are secured with top mounted Flathead screws. The build deck has an 8mm deep juice well and has a two hole squonk opening in order to wick both side of the RDA evenly. This RDA has an adjustable sloped airflow inlet system with two 11mm by 3mm air slots. Each Battlestar Squonker RDA comes with a 10.5mm wide 810 bore ULTEM drip tip. The Battlestar Squonker Starter kit is a great squonk device with plenty of power and features to satisfy any user.

MOD SPECIFICATIONS

Variable Wattage Mode

1 to 200W Output Range

0.05 to 3 ohm VW Resistance Range

0.5 to 8.5 Voltage Output Range

Temperature Control Suite

200 to 600 degree Fahrenheit Range

User Defined Temperature Controlled Mode

0.05 to 2.0 ohm TC Resistance Range

Ni200 Nickel Support

Titanium Support

SS316 Support

Variable Voltage Mode

6.0 to 8.4V Output Range

DVW Mode

User Defined Wattage Curve Mode

10 Second Duration

.96" OLED Screen

Output Mode

Output Temperature

Output Wattage

Output Voltage

Material and Mode Selection

Atomizer Resistance

Output Current

Vape Time Counter

Battery Life Indicator

7ml PMMA Squonk Reservoir

Bottom Filled

Silicone Cover

Threaded Squonk Button

Remove Button and Open Battery Door To Replace E-Liquid Reservoir

Three Button Control Face

Oversized Firing Button

Two Adjustment Buttons

Bottom Sliding Latch Battery Door

Accepts Two High Amperage 18650

Batteries Sold Separately

Secures E-Liquid Reservoir

USB Port

2A Charging

Update and Charging

Gold Plated 510 Threading and Firing Pin

Spring Loaded Gold Plated Center Pin

Device Safety Features

Reverse Protection/Over-Heating Protection/Low Voltage Protection/Short Circuit Protection/10s Overtime Protection

ATOMIZER SPECIFICATIONS

Battlestar Squonker RDA

24mm Diameter

29mm Tall

Dual Post Quad Terminal Build Deck

3mm by 2mm Each Terminal

8mm Deep Juice Well

Top Mounted Flathead Screws

Dual Coil Configuration

Two Hole Squonk Splitter

Sloped Airflow Inlet System

Dual Airflow Slots

11mm by 3mm

Hex Shaped Gold Plated Bottom Feed 510 Contact

Gold Plated Flathead 510 Pin

304 Stainless Steel

510 Drip Tip Adapter

10.5mm Wide 810 Bore ULTEM Drip Tip

PRODUCT INCLUDES

One Battlestar Squonker Box Mod

One Battlestar Squonker RDA

One Spare PMMA E-Liquid Reservoir

One 24K Gold Plated Contact

One Micro USB Cable

One 18650 Adapter

User Manual and Warranty Card